产品资料

Flue gas analysis with no stress, paper or shaky probes – the new testo 330i flue gas analyzer makes this possible. This instrument combines the proven measuring technology of its predecessor testo 330 LL with a revolutionary new method of operation.

详情：
In order to commission and service heating systems as quickly and thoroughly as possible, you need an appropriate flue gas analyzer. A measuring instrument that delivers accurate results, whose probe is firmly secured in the flue gas duct at all times and which can also cope with larger systems or awkward measuring points without difficulty. A measuring instrument like the testo 330i.

Embodying the current trends in flue gas analysis

The testo 330i flue gas analyzer combines precision measuring technology with innovative operation. Its H₂-compensated CO sensor means that you can also use this version of the testo 330i to carry out official acceptance test measurements on heating systems.
At the core of the flue gas analyzer is the technology of the testo 330 LL, which has been proven in practice a thousand times over, with the following features:

• User-replaceable long-life sensors with a service life of up to 6 years. This saves at least one sensor replacement over the instrument's typical useful life
• TÜV-tested according to 1st German Federal Immission Control Ordinance (BImSchV) and EN 50379, Parts 1-3
• Integrated draught and gas zeroing without removing the probe – the probe can remain in the flue during zeroing
• Fresh air dilution upon exceeding a CO threshold value up to 30,000 ppm
• NO sensor for combined heat and power plants

The instrument's completely redesigned method of operation is just as significant when it comes to your day-to-day work: operation of the measuring instrument and the display and documentation of readings are implemented wirelessly via the testo 330i App on your smartphone. The flue gas analyzer is easy to control remotely via Bluetooth, from a distance of up to 5 metres. Also, this means that you always have the system's flue gas values to hand when needed. Once you have finished the measurement, you can add comments or photos to the protocol and send it to your customer or the office via e-mail.

Requirement: iOS 7.1 / Android 4.3 or newer. Mobile end device with Bluetooth 4.0.
 

Work more efficiently with practical accessories

We developed the testoFix probe holder so that you no longer have to be concerned about whether the probe is firmly secured in the pipe. This optional accessory can be attached to the flue gas duct quickly and easily, and holds the probe securely in the centre of flow at all times. testoFix also serves as a fall-proof attachment system for the testo 330i flue gas analyzer. However, the measuring instrument also features extra-strong magnets and can therefore be attached to the burner in the usual way. Incidentally, the hose between probe and flue gas analyzer is somewhat shorter than on previous Testo probes and is particularly flexible, which makes it considerably easier both to work with the measuring instrument and to stow it away in the case.testo 330i flue gas analyzer with long-life gas sensors, 3 slots and integrated draught and gas zeroing. Includes H₂-compensated CO sensor, O₂ measuring cell, No sensor, rechargeable battery and calibration protocol.
技术数据：

General technical data

Weight	720 g (excluding battery)
Dimensions	270 x 160 x 57 mm
Operating temperature	-5 to +45 °C
Power supply	Rech. batt. block 3.7 V / 2.6 Ah; Mains unit 6 V / 1.2 A (optional)
System requirements	requires iOS 7.1 or newer; requires Android 4.3 or newer; requires mobile end device with Bluetooth 4.0
Maximum memory	500000 readings
Storage temperature	-20 to +50 °C

Differential Pressure - Piezoresistive

Measuring range	0 to 300 hPa
Accuracy	±1.5 % of mv (Remaining Range) ±1 % of mv (+50.1 to +100.0 hPa) ±0.5 hPa (0.0 to +50.0 hPa)
Resolution	0.1 hPa

Flue gas O₂

Measuring range	0 to 21 Vol.%
Accuracy	±0.2 Vol.%
Resolution	0.1 Vol.%

General technical data

Weight	720 g (excluding battery)
Dimensions	270 x 160 x 57 mm
Operating temperature	-5 to +45 °C
Power supply	Rech. batt. block 3.7 V / 2.6 Ah; Mains unit 6 V / 1.2 A (optional)
System requirements	requires iOS 7.1 or newer; requires Android 4.3 or newer; requires mobile end device with Bluetooth 4.0
Maximum memory	500000 readings
Storage temperature	-20 to +50 °C

Differential Pressure - Piezoresistive

Measuring range	0 to 300 hPa
Accuracy	±1.5 % of mv (Remaining Range) ±1 % of mv (+50.1 to +100.0 hPa) ±0.5 hPa (0.0 to +50.0 hPa)
Resolution	0.1 hPa

Flue gas O₂

Measuring range	0 to 21 Vol.%
Accuracy	±0.2 Vol.%
Resolution	0.1 Vol.%

探头：

Accessories for probes

Accessories for probes

Hose connection set for separate gas pressure measurement testo 300, testo 330 LL and testo 320

:
0554 1203

Accessories for probes

Differential temperature set consisting of 2 Velcro probes and temperature adaper testo 327

:
0554 1208

Accessories for probes

Probe shaft multi-hole; length 300 mm; Ø 8 mm; for mean CO calculation

:
0554 5762

Accessories for probes

Probe shaft - length 335 mm, Ø 8 mm, Tmax. 1000°C

:
0554 8764

Accessories for probes

Probe shaft; length 180 mm; 8 mm; Tmax. 500 °C

:
0554 9760

Accessories for probes

Probe shaft; length 300 mm; Ø 8 mm; Tmax. 500 °C

:
0554 9761

Accessories for probes

Dual wall clearance probe for O2 supply air measurement

:
0632 1260

Accessories for probes

Probe stop 6 mm; steel; with spring clamp and handle; Tmax. 500 °C

:
0554 3329

Accessories for probes

Our flexible probe shaft helps you to carry out flue gas measurements even on difficult-to-access measurement apertures. Since the probe shaft is made of very flexible plastic, you can easily bend it, allowing it to be inserted into exhaust flues which are obstructed (e.g. by sloping ceilings).

:
0554 9770

Accessories for probes

Probe stop 8 mm; steel; with spring clamp and handle; Tmax. 500 °C

:
0554 3330

Combustion air / temperature

Combustion air / temperature

Combustion air temperature probe, immersion depth 60 mm

:
0600 9797

Combustion air / temperature

Combustion air temperature probe with an immersion depth of 190 mm – measuring range: 0 to +100 °C

:
0600 9787

Probes

Probes

Flue gas probe 300 mm, diameter 8 mm

:
0600 9781

Probes

Flue gas probe 180 mm, diameter 6 mm

:
0600 9782

Probes

Flue gas probe 180 mm, diameter 8 mm

:
0600 9780

Probes

Flue gas probe 300 mm, diameter 6 mm

:
0600 9783