产品资料

Proven technology meets revolutionary operation. The testo 330i flue gas analyzer was specifically developed to help you to overcome all the obstacles you meet when servicing and commissioning heating systems.  

详情：
The testo 330i flue gas analyzer is an advancement of the testo 330 LL flue gas analyzer. Its proven measuring technology is once again at the heart of the testo 330i. This means that you can rely on highly accurate results when measuring flue gas, draught and O₂ supply air. The testo 330i also has the following impressive features:

• User-replaceable long-life sensors with a service life of up to 6 years
• Successful TÜV inspection according to the 1st German Federal Immission Control Ordinance (BImSchV) and EN 50379, Parts 1-3
• ntegrated draught and gas zeroing. This means that the probe does not have to be removed from the flue gas duct for the zeroing
• Fresh air dilution up to 30,000 ppm upon exceeding a CO threshold value
• NO sensor for combined heat and power plants

The new testoFix probe holder is available as an accessory, so the flue gas probe is guaranteed not to lose the centre of flow once it has been found. This can be attached to the pipe quickly and easily. It holds the probe in the centre of flow and also serves as a fall-proof suspension system for the testo 330i flue gas analyzer. Incidentally, the hose between probe and measuring instrument is lighter and more flexible than before.

The future of flue gas measuring technology

The testo 330i no longer has a display. How do you make the correct adjustments to the flue gas analyzer? Where can you view the readings? What about the creation of measurement protocols? Via the testo 330i App on your smartphone. The readings are transferred from the testo 330i flue gas analyzer to the App via Bluetooth. So you always have the relevant values to hand whenever you need them. This is particularly useful when faced with larger systems or awkward measuring points as there is no need to look around corners, which can be annoying. The measurement parameters can also be set intuitively, via the App. Once you have completed the measurement, you can add comments or photos of the system to the results on site, and send them to your customer or the office via e-mail.

Requirement: iOS 7.1 / Android 4.3 or newer. Mobile end device with Bluetooth 4.0.testo 330i flue gas analyzer with long-life gas sensors, 3 slots and integrated draught and gas zeroing, including O₂/CO measuring cell, NO sensor, rechargeable battery and calibration protocol.  
技术数据：

General technical data

Weight	720 g (excluding battery)
Dimensions	270 x 160 x 57 mm
Operating temperature	-5 to +45 °C
Power supply	Rech. batt. block 3.7 V / 2.6 Ah; Mains unit 6 V / 1.2 A (optional)
System requirements	requires iOS 7.1 or newer; requires Android 4.3 or newer; requires mobile end device with Bluetooth 4.0
Maximum memory	500000 readings
Storage temperature	-20 to +50 °C

Differential Pressure - Piezoresistive

Measuring range	0 to 300 hPa
Accuracy	±1.5 % of mv (Remaining Range) ±1 % of mv (+50.1 to +100.0 hPa) ±0.5 hPa (0.0 to +50.0 hPa)
Resolution	0.1 hPa

Flue gas O₂

Measuring range	0 to 21 Vol.%
Accuracy	±0.2 Vol.%
Resolution	0.1 Vol.%

General technical data

Weight	720 g (excluding battery)
Dimensions	270 x 160 x 57 mm
Operating temperature	-5 to +45 °C
Power supply	Rech. batt. block 3.7 V / 2.6 Ah; Mains unit 6 V / 1.2 A (optional)
System requirements	requires iOS 7.1 or newer; requires Android 4.3 or newer; requires mobile end device with Bluetooth 4.0
Maximum memory	500000 readings
Storage temperature	-20 to +50 °C

Differential Pressure - Piezoresistive

Measuring range	0 to 300 hPa
Accuracy	±1.5 % of mv (Remaining Range) ±1 % of mv (+50.1 to +100.0 hPa) ±0.5 hPa (0.0 to +50.0 hPa)
Resolution	0.1 hPa

Flue gas O₂

Measuring range	0 to 21 Vol.%
Accuracy	±0.2 Vol.%
Resolution	0.1 Vol.%

探头：

Accessories for probes

Accessories for probes

Hose connection set for separate gas pressure measurement testo 300, testo 330 LL and testo 320

:
0554 1203

Accessories for probes

Differential temperature set consisting of 2 Velcro probes and temperature adaper testo 327

:
0554 1208

Accessories for probes

Probe shaft multi-hole; length 300 mm; Ø 8 mm; for mean CO calculation

:
0554 5762

Accessories for probes

Probe shaft - length 335 mm, Ø 8 mm, Tmax. 1000°C

:
0554 8764

Accessories for probes

Probe shaft; length 180 mm; 8 mm; Tmax. 500 °C

:
0554 9760

Accessories for probes

Probe shaft; length 300 mm; Ø 8 mm; Tmax. 500 °C

:
0554 9761

Accessories for probes

Dual wall clearance probe for O2 supply air measurement

:
0632 1260

Accessories for probes

Probe stop 6 mm; steel; with spring clamp and handle; Tmax. 500 °C

:
0554 3329

Accessories for probes

Our flexible probe shaft helps you to carry out flue gas measurements even on difficult-to-access measurement apertures. Since the probe shaft is made of very flexible plastic, you can easily bend it, allowing it to be inserted into exhaust flues which are obstructed (e.g. by sloping ceilings).

:
0554 9770

Accessories for probes

Probe stop 8 mm; steel; with spring clamp and handle; Tmax. 500 °C

:
0554 3330

Combustion air / temperature

Combustion air / temperature

Combustion air temperature probe, immersion depth 60 mm

:
0600 9797

Combustion air / temperature

Combustion air temperature probe with an immersion depth of 190 mm – measuring range: 0 to +100 °C

:
0600 9787

Probes

Probes

Flue gas probe 300 mm, diameter 8 mm

:
0600 9781

Probes

Flue gas probe 180 mm, diameter 6 mm

:
0600 9782

Probes

Flue gas probe 180 mm, diameter 8 mm

:
0600 9780

Probes

Flue gas probe 300 mm, diameter 6 mm

:
0600 9783